How do I use a Klein Tools CL110 Digital Clamp Meter, AC/DC Auto-Ranging 400 Amp Clamp Meter with a Klein Tools #69409 Line Splitter 10X?

The Klein Tools #69409 Line Splitter 10X is for AC Voltage circuits ONLY.

The Klein Tools #69409  Line Splitter 10" can be used with all the Klein Tools Clamp meters.

How to use a Klein Tools CL110 Digital Clamp Meter, AC/DC Auto-Ranging 400 Amp Clamp Meter with a Klein Tools #69409 Line Splitter 10X:

1. Plug the male end of the Klein Tools #69409  Line Splitter 10X into a 120 Volt AC receptacle.

2. Plug the load (any 120V AC appliance or device) into the female end of Klein Tools #69409  Line Splitter 10X .

3. Measure the AC current/amps by clamping the clamp on your Klein Tools CL110 Digital Clamp Meter, AC/DC Auto-Ranging 400 Amp Clamp Meter around the opening in the Klein Tools #69409  Line Splitter 10X.

4.Turn the selector knob on your Klein Tools CL110 Digital Clamp Meter, AC/DC Auto-Ranging 400 Amp Clamp Meter to the AC Amps setting. (Use the highest setting in amps on the Clamp Meter)

5. The AC current/amps measured on the display screen by the Klein Tools CL110 Digital Clamp Meter, AC/DC Auto-Ranging 400 Amp Clamp Meter is 10 times the actual AC current/amps present in the circuit.

For the correct AC current/amp reading divide the reading on the display screen of your Klein Tools CL110 Digital Clamp Meter, AC/DC Auto-Ranging 400 Amp Clamp Meter by 10.

View Klein Tools #69409 Line Splitter 10X instructions with diagram.